Magnetic Formwork System

Magnetic Formwork System
Magnetic Formwork SystemMagnetic Formwork SystemMagnetic Formwork System
CategoriesMagnetic Shuttering System
AlbumView larger image
Update Time2019-05-24
Detail Information

Detailed Product Description

 70mm Magnetic Formwork System(Confortable Solution)

This formwork-system, consist of a formwork-profile with integrated magnetic tension-mechanism, which
can be used in different formworks. It is specially suitable for the production of filigran- respectively double walls and lattice girder ceilings. By mean of the tension-mechanism, the profile (layer is planed) is pulled to the bottom of the shuttering, so that an exactly edge of the manufactured item is managed. For the system is one unit, measuring mistakes are not possible. The easy and quick handling increases the work safety. Using the corresponding lever, the system can be taken off and removed easily from the bottom of the shuttering.
By mean of the separated arrangement of tension mechanism and handle-knob, and tension mechanism and shuttering, the forces acting on the formwork and on the magnet during the concrete process are absorbed.
The built-in tension elements are placed in a save position, so that the formwork-system is less sensitive against soiling.
Note: Recess profiles before first using into oil!
With defect the old shuttering, by remove from 3 screws, can be easily exchanged.- very leight weight


-very leight weight
- simple and safe handling
- simple servicing due to open system
- Magnetic power of 900 kg, depending on Ground Surface (steel, thickness, temperatur, ruffness)
- changing the formwork just by removing three screws
- materials (Steel and Polyurethane) resistant against concrete
- easy to clean
- The Springs pull the formwork down to the Table and prevent the penetration of concrete (with
120kg per Magnet unit)
- Spring elements help to unlock the magnets when demoulding


With one chamfer:


Please send your message to us

Agree to use terms of service